"Our DS Series dispense systems are robust, large format platforms that handle all types of applications with ease. Ideal for dispense applications utilizing adhesive, solder paste, conductive adhesive, potting compounds, and more."
Machine Features:
DS SERIES OPEN FACE GANTRY_DS-9100
DS9100-IL OPEN FACE GANTRY
* HEATED CONVEYOR RAILS
* FORCED AIR MODULE
* RIGHT SIDE ORIGIN
* LEFT SIDE MONITOR MOUNT
* STATION #1 CONTROLS:
* SERVO MOTOR
* FPC
* STATION #2 CONTROLS:
* SERVO MOTOR
* FPC
* NCM5000
* STATION #3 CONTROLS:
* MV50 TWO-MATERIAL MIXING
* 208V 50/60 HZ
* Welded Steel Frame
* Footprint: 52"W x 50"D x 77"H
(1.3M x 1.3M x 1.9M)
* 24" x 24" (609mm x 609mm) Dispense Area
* Positioning Accuracy +/-0.0015" (+/-0.038mm)
* Linear speed up to 20 inches/second
(508mm/second)
* Automatic Vision Alignment System
* Red-Blue Illuminator
* Needle Cleaner
* Station #1 Tool-less Taper-Lock Mounting
Hardware on retractable air cylinder
* Adjustable keyboard mount
* TCP/IP Network Ready
* Second internal hard-drive for backups,
and CD for install
* Interior Lighting
* Interlocked Safety Barrier for operator
safety
* X-Y-Z Servo Motors with Precision Ball Screws
* 3 Color Status Light Tower
* Industrial Grade PC and Color Flat Panel
Monitor
* Easy Access Electronics Drawer
* Easy programming of dots, lines, fills, arcs, etc.
through GPD Global FLOware Operating
Software
* Real-Time Editor while dispenser is in production
* Startup and Leveling Kit
* 1 USB Copy of DS Series Documentation Pkg
for Installation, Operation and Maintenance
* CE Declaration of Conformity
* 208V 60Hz Single Phase
EXHAUST FAN ASSEMBLY
CONTACT SURFACE SENSOR_DS04_60MM STROKE
CALIB STN_MATERIAL_PAPER/BACKLIT
SCALE_4-PLACE_OEM_21 G CAP_W/HEAT SHIELD
NEEDLE CLNR_ADDITIONAL_MULTI-WIPE JAWS
NOZZLE VACUUM_NCM NEEDLE_V3
OPTION_CLEARVU_DS OPEN FACE GANTRY
THERMAL IMAGE_TEMP MONITOR_CAMERA ASSY
POWER SUPPLY_220V UPS_FOR HEATED MACHINE
TAPER LOCK HDWE_STA #2_STD OR OFG
STATION #3,MV-50 VALVE MOUNTING HARDWARE
CONTROLS_MV50_SINGLE STATION
PUMP_MV50_MIXING CARTRIDGE_SLIP LUER
CARTRIDGE HARDWARE_MV50_ 3:2_NO LABEL
CONTROLS_MV50_SINGLE STATION_UPGRADE_EXI
CONTROLS_DUAL VALVE_20 PIN CONNECTOR
Reference 22110527 for standard DS
CONTROLS_NCM5000_DS_STN 2
CONTROLS_FPC_DS_STN 1
* Configure FPC for station #1
CONTROLS_FPC_DS_STN 2
* Configure FPC for station #3
CONVEYOR_MANUAL WIDTH ADJUST_HEATED RAIL
BOARD STOP_VERTICAL_HD_PHD_MOD
BOARD STOP,4.18 EXTENSION
KIT_SENSOR_HIGH TEMP_FLEXIBLE
FORCED AIR MODULE_230_208VAC_
PUMP_PRECISION AUGER_SERVO MTR HOUSING
CARTRIDGE ASSY,HYFLO_STANDARD_RT_.186
KIT_PREC AUG SUPPORT_.186 DIA
Needle Selection:
* (3) 221BL17E01A, 17G Large Hub Needle, Relieved Tip, 6mm
* (3) 221BL18E04A, 18G Large Hub Needle, Releived Tip, 6mm
* (3) 221BL19E03A, 19G Large Hub Needle, Relieved Tip, 6mm
* Feed tube support for 186 cartridge size
* (30) Material Feed Tubes for 186 diameter auger
CABLE_ASSY_AUGER PMP TO Z-COVER
FPC_PUMP INTERFACE_PREC_.186 STEM_M5
* Attaches to 186 cartridge
* Contains EPDM O-rings
PUMP_JETTING NCM5000_DS
* Nozzle Plate Assembly, Ceramic, 125micron
* (1) Grey Diaphragm
CERAMIC_NOZZLE_INSERT_125um
O-RING_NOZZLE PLATE_NCM5000
O-RING_NOZZLE INSERT_W/O SCREWS
FEEDWAY CLEANING BRUSHES
NOZZLE_CLEANING_KIT_NCM5000_125um
CUP,PLASTIC_1 OZ PURGE CUP
CALIBRATION CHIP,.005,.008,.011,.040
CERAMIC PLATE, WHITE
PAPER ROLL,THERMAL_1.0 OD X 1 7/16 LG
TOUCH PROBE,DS04
SPECS:
12/9-CHANGED LINE #7 NEW CONFIG 22295712-0001
12/9-CHANGED LIN #8 FROM 22101408 TO 22101364
12/9-CHANGED LINE #22 NEW CONFIG 22296044-0001
12/9-INSERTED LINE #23 22160561 X 2 (BOARD STOP EXTENSIONS)
12/9-INSERTED LIN #29 22198331 X 1 (AUGER CABLE)
12/9-CHANGED LINE #42 FROM 22120999 TO 22121310
12/9-CHANGED LINE #45 FROM 22191701 TO 22191710
Machine Features:
- Inline model is SMEMA compatible
- preheat
- 3 Pump Stations
- 24"x24" Work Surface (Max Board)
- Positioning Accuracy ± 0.0015″ (± 0,0381 mm)
- Repeatability ± 0.0006″ (± 0,0152 mm)
- Automatic Vision Alignment System (GPD Cyclops system) and Pattern Recognition Trainer
- Red/Blue Illuminator
- Needle Cleaner
- Backlit Auto Calibration Station for automatic X,Y,Z needle calibration
- Station 1 Taper-Lock Mounting Hardware
- Easy Programming of dots, lines, fills, arcs, etc. through GPD Global FLOware Operating Software
- TCP/IP Network Ready
- Welded Steel Frame
- Second Internal Hard Drive for Backups
- Interior Lighting
- Interlocked Safety Barriers for Operator Safety
- X-Y-Z Brushless Servo Motors with Precision Ball Screws
- Linear Speed up to 20 inches/second (508 mm/second)
- 3-Color Status Light Tower – Red, Amber, Green
- Pentium PC and Color, Flat Panel Monitor
- Easy Access Electronics Drawer
- Real-Time Editor while system is in production
- Start Up & Leveling Kit
- 1 USB copy of DS Series Documentation for Installation, Operation, and Maintenance
- CE Declaration of Conformity
- 115 VAC 60 Hz or 230 VAC 50 Hz
DS SERIES OPEN FACE GANTRY_DS-9100
DS9100-IL OPEN FACE GANTRY
* HEATED CONVEYOR RAILS
* FORCED AIR MODULE
* RIGHT SIDE ORIGIN
* LEFT SIDE MONITOR MOUNT
* STATION #1 CONTROLS:
* SERVO MOTOR
* FPC
* STATION #2 CONTROLS:
* SERVO MOTOR
* FPC
* NCM5000
* STATION #3 CONTROLS:
* MV50 TWO-MATERIAL MIXING
* 208V 50/60 HZ
* Welded Steel Frame
* Footprint: 52"W x 50"D x 77"H
(1.3M x 1.3M x 1.9M)
* 24" x 24" (609mm x 609mm) Dispense Area
* Positioning Accuracy +/-0.0015" (+/-0.038mm)
* Linear speed up to 20 inches/second
(508mm/second)
* Automatic Vision Alignment System
* Red-Blue Illuminator
* Needle Cleaner
* Station #1 Tool-less Taper-Lock Mounting
Hardware on retractable air cylinder
* Adjustable keyboard mount
* TCP/IP Network Ready
* Second internal hard-drive for backups,
and CD for install
* Interior Lighting
* Interlocked Safety Barrier for operator
safety
* X-Y-Z Servo Motors with Precision Ball Screws
* 3 Color Status Light Tower
* Industrial Grade PC and Color Flat Panel
Monitor
* Easy Access Electronics Drawer
* Easy programming of dots, lines, fills, arcs, etc.
through GPD Global FLOware Operating
Software
* Real-Time Editor while dispenser is in production
* Startup and Leveling Kit
* 1 USB Copy of DS Series Documentation Pkg
for Installation, Operation and Maintenance
* CE Declaration of Conformity
* 208V 60Hz Single Phase
EXHAUST FAN ASSEMBLY
CONTACT SURFACE SENSOR_DS04_60MM STROKE
CALIB STN_MATERIAL_PAPER/BACKLIT
SCALE_4-PLACE_OEM_21 G CAP_W/HEAT SHIELD
NEEDLE CLNR_ADDITIONAL_MULTI-WIPE JAWS
NOZZLE VACUUM_NCM NEEDLE_V3
OPTION_CLEARVU_DS OPEN FACE GANTRY
THERMAL IMAGE_TEMP MONITOR_CAMERA ASSY
POWER SUPPLY_220V UPS_FOR HEATED MACHINE
TAPER LOCK HDWE_STA #2_STD OR OFG
STATION #3,MV-50 VALVE MOUNTING HARDWARE
CONTROLS_MV50_SINGLE STATION
PUMP_MV50_MIXING CARTRIDGE_SLIP LUER
CARTRIDGE HARDWARE_MV50_ 3:2_NO LABEL
CONTROLS_MV50_SINGLE STATION_UPGRADE_EXI
CONTROLS_DUAL VALVE_20 PIN CONNECTOR
Reference 22110527 for standard DS
CONTROLS_NCM5000_DS_STN 2
CONTROLS_FPC_DS_STN 1
* Configure FPC for station #1
CONTROLS_FPC_DS_STN 2
* Configure FPC for station #3
CONVEYOR_MANUAL WIDTH ADJUST_HEATED RAIL
BOARD STOP_VERTICAL_HD_PHD_MOD
BOARD STOP,4.18 EXTENSION
KIT_SENSOR_HIGH TEMP_FLEXIBLE
FORCED AIR MODULE_230_208VAC_
PUMP_PRECISION AUGER_SERVO MTR HOUSING
CARTRIDGE ASSY,HYFLO_STANDARD_RT_.186
KIT_PREC AUG SUPPORT_.186 DIA
Needle Selection:
* (3) 221BL17E01A, 17G Large Hub Needle, Relieved Tip, 6mm
* (3) 221BL18E04A, 18G Large Hub Needle, Releived Tip, 6mm
* (3) 221BL19E03A, 19G Large Hub Needle, Relieved Tip, 6mm
* Feed tube support for 186 cartridge size
* (30) Material Feed Tubes for 186 diameter auger
CABLE_ASSY_AUGER PMP TO Z-COVER
FPC_PUMP INTERFACE_PREC_.186 STEM_M5
* Attaches to 186 cartridge
* Contains EPDM O-rings
PUMP_JETTING NCM5000_DS
* Nozzle Plate Assembly, Ceramic, 125micron
* (1) Grey Diaphragm
CERAMIC_NOZZLE_INSERT_125um
O-RING_NOZZLE PLATE_NCM5000
O-RING_NOZZLE INSERT_W/O SCREWS
FEEDWAY CLEANING BRUSHES
NOZZLE_CLEANING_KIT_NCM5000_125um
CUP,PLASTIC_1 OZ PURGE CUP
CALIBRATION CHIP,.005,.008,.011,.040
CERAMIC PLATE, WHITE
PAPER ROLL,THERMAL_1.0 OD X 1 7/16 LG
TOUCH PROBE,DS04
SPECS:
12/9-CHANGED LINE #7 NEW CONFIG 22295712-0001
12/9-CHANGED LIN #8 FROM 22101408 TO 22101364
12/9-CHANGED LINE #22 NEW CONFIG 22296044-0001
12/9-INSERTED LINE #23 22160561 X 2 (BOARD STOP EXTENSIONS)
12/9-INSERTED LIN #29 22198331 X 1 (AUGER CABLE)
12/9-CHANGED LINE #42 FROM 22120999 TO 22121310
12/9-CHANGED LINE #45 FROM 22191701 TO 22191710
